Plugin: Time Slip (time tracker) [v1.0.2, 2024-11-12]

shikuz · 2024-10-01T14:01:12.175Z

Hi @ncatanchin, let's try the following:

Please verify that in your Time Slip settings you have Log note tag set to time-slip.
After creating the note, setting its title, and tagging it with time-slip, please switch to any other note.

If all goes well, it should appear on the Time Slip panel and selected by default. Then, you should be able to enter new tasks.

ncatanchin · 2024-10-01T14:27:20.193Z

No luck!

Nothing showing up in Time Slip panel (no change) after following your instructions.

I will be installing a clean Joplin on another machine later this evening, I'll give it a shot without other plugins that might be conflicting, otherwise, if there's anything further you think I should try, please let me know.

Thanks

shikuz · 2024-10-02T05:31:08.284Z

I'm using a number of plugins without fault, but we don't have many plugins in common, so there might be a conflict with one of them (hard to imagine one, but it's possible). could you try to enable debugging and check for any time-slip related errors?

HiBing0 · 2024-10-02T07:11:22.472Z

Hi. As more records I add I see a necessity of "order by" feature. It could be a plugin settings option or in form of clickable table columns names. It seems the records of particular date range displayed as if they were an result of SQL query without 'order by' clause - in unpredictable order. For now I have record1, record2, and so on of the same Project, were created sequentially by date, but displayed as record2, record4, record3, record1.
To be honest, I slightly corrected some records, inside the note, the ones - accidentally, and the ones - to change a bit the endtime's time. So maybe there is another invisible to me field (e.g. Modified) the records ordered by, I don't know this. At the same time, I saw that it is better not to make such changes, especially by deleting, for example, time digits, and then adding the necessary ones. In such way we can easily catch an error, cos the Duration recalculates continuously. But it is better to first select digits, and then insert the necessary ones in the same place, preserving field structure.
I've checked again: my records names and dates have the same order, record1,2,3,4 have corresponding ascending dates, but they displayed as I wrote earlier, unordered.

shikuz · 2024-10-02T12:47:34.302Z

HiBing0:

"order by" feature.

Hi @HiBing0, I completely agree. In fact it has already been implemented, including a dedicated setting (sort by duration, end time or name) and suppoorting clicks on the table header. it will be part of v0.3.0 once it's released.

HiBing0:

in unpredictable order

the current order is by the total duration of the task or project.

shikuz · 2024-10-04T11:35:53.087Z

v0.3.0

added: sort completed tasks by duration, end time or name
fixed: memory leak
improved: sorted autocomplete
improved: debounce updates on note change

ncatanchin · 2024-10-04T11:53:24.848Z

Couple of things to update you on regarding this issue:

Fresh install of Joplin v3.1.17, same OS - Ubuntu 24.10 - no plugins other than Time Slip, everything worked as expected
When the plugin is using postMessage for iframe communications, there is no note being returned, eg. for updateLogNotes:

{
    "message": {
        "name": "updateLogNotes",
        "notes": []
    }
}

ncatanchin · 2024-10-04T12:05:05.184Z

I have checked out the log in my profile directory, here are some more clues:

2024-10-02 01:04:56: joplin.plugins: [error] Uncaught exception in plugin "joplin.plugin.alondmnt.time-slip": Error: View already added or there is already a view with this ID: plugin-view-joplin.plugin.alondmnt.time-slip-timeSlipPanel
Error: View already added or there is already a view with this ID: plugin-view-joplin.plugin.alondmnt.time-slip-timeSlipPanel
    at Plugin.addViewController (/tmp/.mount_JoplinZFnQha/resources/app.asar/node_modules/@joplin/lib/services/plugins/Plugin.js:138:19)
    at JoplinViewsPanels.<anonymous> (/tmp/.mount_JoplinZFnQha/resources/app.asar/node_modules/@joplin/lib/services/plugins/api/JoplinViewsPanels.js:49:25)
    at Generator.next (<anonymous>)
    at /tmp/.mount_JoplinZFnQha/resources/app.asar/node_modules/@joplin/lib/services/plugins/api/JoplinViewsPanels.js:9:71
    at new Promise (<anonymous>)
    at __awaiter (/tmp/.mount_JoplinZFnQha/resources/app.asar/node_modules/@joplin/lib/services/plugins/api/JoplinViewsPanels.js:5:12)
    at JoplinViewsPanels.create (/tmp/.mount_JoplinZFnQha/resources/app.asar/node_modules/@joplin/lib/services/plugins/api/JoplinViewsPanels.js:42:16)
    at /tmp/.mount_JoplinZFnQha/resources/app.asar/node_modules/@joplin/lib/services/plugins/utils/executeSandboxCall.js:55:19
    at Generator.next (<anonymous>)
    at /tmp/.mount_JoplinZFnQha/resources/app.asar/node_modules/@joplin/lib/services/plugins/utils/executeSandboxCall.js:8:71
2024-10-02 01:04:56: joplin.plugins: Finished running onStart handler: joplin.plugin.alondmnt.time-slip (Took 265ms)

It seems that my plugins are being initialised more than once?

image1634×1066 271 KB

Further down the log, Time Slip has some complaints:

2024-10-02 01:04:56: PostMessageService: [warn] Cannot receive message because no viewMessageHandler was found {"pluginId":"joplin.plugin.alondmnt.time-slip","viewId":"plugin-view-joplin.plugin.alondmnt.time-slip-timeSlipPanel","contentScriptId":null,"from":"plugin","to":"userWebview","id":"plugin_17277950965660.1178587123889927","content":{"name":"updateRunningTasks","tasks":{}}}
2024-10-02 01:04:56: PostMessageService: [warn] Cannot receive message because no viewMessageHandler was found {"pluginId":"joplin.plugin.alondmnt.time-slip","viewId":"plugin-view-joplin.plugin.alondmnt.time-slip-timeSlipPanel","contentScriptId":null,"from":"plugin","to":"userWebview","id":"plugin_17277950965660.15820855999941652","content":{"name":"updateRunningTasks","tasks":{}}}
2024-10-02 01:04:56: PostMessageService: [warn] Cannot receive message because no viewMessageHandler was found {"pluginId":"joplin.plugin.alondmnt.time-slip","viewId":"plugin-view-joplin.plugin.alondmnt.time-slip-timeSlipPanel","contentScriptId":null,"from":"plugin","to":"userWebview","id":"plugin_17277950965660.13512576568637713","content":{"name":"updateCompletedTasks","tasks":[]}}
2024-10-02 01:04:56: PostMessageService: [warn] Cannot receive message because no viewMessageHandler was found {"pluginId":"joplin.plugin.alondmnt.time-slip","viewId":"plugin-view-joplin.plugin.alondmnt.time-slip-timeSlipPanel","contentScriptId":null,"from":"plugin","to":"userWebview","id":"plugin_17277950965660.009873751814339915","content":{"name":"updateCompletedTasks","tasks":[]}}

Clearly there is something dodgy with my environment / set of plugins.

Thanks for your assistance with troubleshooting, I'll continue to look into this, however I'm leaning towards a new install and limiting my plugins (I have many installed and inactive, some installed that I don't really use, etc) as well as checking the logs to see where things are going wrong

shikuz · 2024-10-04T14:40:05.764Z

Thanks @ncatanchin for the additional information.

ncatanchin:

Fresh install of Joplin v3.1.17

Just making sure that I understood: Were you able to create time-slip notes and add entries to them via the panel?

ncatanchin:

When the plugin is using postMessage

Is the empty message from your main / first installation of Joplin and the plugin?

This message indeed means that Time Slip is unable to find notes tagged with time-slip. Could you check what Joplin reports as the number of notes tagged with the tag? (for example, I have 3 logs.)

ncatanchin:

It seems that my plugins are being initialised more than once?

I'm not an expert on Joplin's plugin system, but it does look strange. I don't see this in my logs. Perhaps this can explain the "View already added" error.

ncatanchin:

Further down the log, Time Slip has some complaints:

Having this PostMessageService error right after the plugin starts is normal, I believe, if the panel's JS script has yet to load while the message was sent. This happens on my device as well after Joplin starts (just once in every app session).

EDIT: Please try the latest v0.3.1. I tried to handle one edge case that could explain the behaviour you're experiencing.

ncatanchin · 2024-10-05T05:25:38.840Z

Sorry, wasn't terribly clear with my findings!

Confirming that only point 1 in my previous post is related to the fresh install, everything else relates to the original install where I'm having the issues.

time-slip tag currently showing a count of 7:

I'll try the updated version ASAP!

Cheers

HiBing0 · 2024-10-06T15:23:36.082Z

shikuz:

added: sort completed tasks by duration, end time or name

Sort by Endtime - is good. But where is the Duration field, which I wanted to see? How to obtain chronologically ordered list with tasks Durations?

shikuz · 2024-10-06T22:50:06.699Z

Due to size constraints on mobile, the task list displays 4 columns, depending on your choice, otherwise there is not enough space on screen for the entire table. I might be able to make this behavior dependent on the available space, and show all columns where possible, but no promises.

shikuz · 2024-10-07T10:46:53.268Z

v0.3.2

added: Escape keypress handling in text boxes
improved: show all 5 summary columns when panel is wide enough
improved: rewrite autocomplete lists

v0.3.1

fixed: handle multiple identical time-slip tags

shikuz · 2024-10-13T12:42:10.193Z

v0.4.0

added: setting Order of time logs (ascending / descending by start time)
added: setting Auto-sort time logs (see screen capture)
- you may activate auto-sorting, so that edited entries are automatically resorted
added: command Sort Time Slip log (under the Note menu)
added: command Copy Time Slip summary (under the Note menu) (see screen capture)
fixed: get selected note before calling debounce to handle note switching properly
fixed: ensure the log note list is unique
various minor improvements

time-slip-sort

ncatanchin · 2024-10-17T00:08:09.783Z

@shikuz just want to give you an update on how I'm going with this plugin.

Unfortunately, no good news to share.

The clean Joplin installation where I was successful at getting Time Slip working, is no longer working. I believe this change started right after I configured synchronisation to bring it up to date with my primary installation. No other plugins installed. Same issue / behaviour as primary install.
For my primary installation, I progressively disabled and removed plugins to see if this would help. I have updated the plugin to the latest version 0.4.0. I removed the plugin and then installed it again. No joy.
SQL UNIQUE constraint failed error - see screenshot. This is happening on primary install. It also happened with older versions, so it's not something from a new version of the plugin. Previously, I did open the Joplin sqlite database and removed the offending key, and that stopped the error.

image1683×244 76.6 KB

Please also note that all my Joplin installs have been updated to the latest version 3.0.18, running on Ubuntu Linux v24.10.

shikuz · 2024-10-18T00:35:18.118Z

v0.4.1

fixed: handle case where log note tag is not first page of tags (by @ncatanchin) (#1)
fixed: handle more than 100 logs

HiBing0 · 2024-10-23T11:38:51.635Z

Why the new task starts right after I choose the suggested project name? I'd like to Start tasks by myself.

shikuz · 2024-10-23T12:24:03.959Z

I find it convenient for quickly entering tasks.
if you select the project first, and the task second, the timer won't start automatically.
but I'll consider changing it, if it's a popular request.

shikuz · 2024-10-25T13:52:24.732Z

I think that I found a way I'm comfortable with to add Markdown table support, following @Eduardo's request. The new commands enable exporting time logs to Markdown tables (insert the table to a note, or replace current selection), as well as importing time logs from Markdown tables.

v1.0.0

added: commands for exporting to markdown and importing from markdown (see screen capture)
- Note -> Insert Time Slip markdown log
- Note -> Insert Time Slip markdown summary
- Tools -> Convert selected table to CSV
fixed: Enter key press when no autocomplete item is selected
improved: organise commands in Note / Tools menus
improved: debounce using lodash

time-slip-markdown

Eduardo · 2024-10-25T15:42:07.564Z

Hi @shikuz Thanks for the upgrading.