Hide button switch Markdown and WYSIWYG

Daeraxa · 2022-07-08T01:37:40.583Z

That seems really odd. It definitely works normally. Maybe inspect the element with the dev tools and see if the CSS is being overruled by anything?

Or take a screenshot of the editor and compare it to after you add the CSS to see if somehow you are targeting some other element. I doubt it but it is always possible.

Leigh · 2022-07-08T01:47:04.938Z

Will try that approach tomorrow - could you be more specific please - that is stretching my abilities and knowledge very, very, very thin

Daeraxa · 2022-07-08T02:21:54.117Z

So out of curiosity (as I've not heard of it before) I installed a VM of archlabs with dwm and installed the same AUR package as you, added the CSS and it works just fine.

I would check the following:

Double check you are editing the right file in the right place - open the profile dir from Joplin (Help > Open profile directory) and check the userchrome in there is the same one as is being opened from Options > Appearance > Custom stylesheet for Joplin-wide app styles. It should be in ~/.config/joplin-desktop.
Open Joplin and go Help > Toggle development tools.
See this thread I posted before for a better description but basically press the little "arrow in a box" icon in the top left of the dev tools and click the editor button you are trying to remove.

You should see something like this:

In the elements section.

In the styles section at the bottom you can see the actual styles being applied - as I can't emulate yours exactly I applied a red border to my button which is being overwritten (as shown by the strikethrough) but you can still see that the CSS was valid and it would apply it if it wasn't being overruled.

Check to see if you have anything like that in there for the same selector but with display: none.

Leigh · 2022-07-08T13:00:32.230Z

Thanks
AL rocks!

Daeraxa:

Double check you are editing the right file in the right place - open the profile dir from Joplin (Help > Open profile directory) and check the userchrome in there is the same one as is being opened from Options > Appearance > Custom stylesheet for Joplin-wide app styles. It should be in ~/.config/joplin-desktop.

My /home/leigh/.config/joplin-desktop/userchrome.css:
(I had edited out the comment line in my previous posts to see if that was the problem)

div.editor-toolbar div button {
	 display: none !important;
}

Daeraxa:

Open Joplin and go Help > Toggle development tools.
See this thread I posted before for a better description but basically press the little "arrow in a box" icon in the top left of the dev tools and click the editor button you are trying to remove.

I have this:

ArchLabs_2022-07-08-30_1920x1848996×1049 257 KB

EDIT: I just tried

uninstalling all plugins
making a new userchrome.css and pasting in from the post linked above link

I am using Openbox

Daeraxa · 2022-07-08T14:33:47.509Z

I'm honestly at a bit of a loss, it just looks like Joplin isn't even seeing the file?

If you delete/rename the userchrome.css then use the options menu in Joplin to open the stylesheet, does it regenerate in the correct place?

Also try to see if any other CSS works at all in that file e.g.

div.sidebar {
  background-color: #FF69B4;
}

Leigh · 2022-07-08T15:57:26.606Z

Daeraxa:

If you delete/rename the userchrome.css then use the options menu in Joplin to open the stylesheet, does it regenerate in the correct place?

Yes it does

Daeraxa:

Also try to see if any other CSS works at all in that file e.g.
div.sidebar {
  background-color: #FF69B4;
}

No, it doesnt do anything (with light or dark theme, just in case)

Leigh · 2022-07-08T16:05:18.713Z

button[title="New to-do"] {
	/* button - for keyboard warriors - removes the new to-do button */
	 display: none;
}

Works tho

Leigh · 2022-07-08T16:29:41.258Z

So,
I have i3 set up on TTY2 so I thought I'd try there
I put the code for hiding the toggle editor button in my userchrome.css and started Joplin in i3
The button was still there
But when I clicked on it it dissapeared!
I shut down Joplin and reopened it in Openbox on TTY1 and no button
shutdown and restarted Joplin
the bloody button is back

Daeraxa · 2022-07-08T16:33:46.631Z

Yeah, I just looked at a previous post and realised something, I never even considered anyone trying to remove the button to stay inside the richtext editor - it is virtually always people wanting to disable it. I only just spotted the elements in the dev tool html you posted.

Try:

div.joplin-tinymce button.richText-active {
  display: none !important;
}

Leigh · 2022-07-08T16:38:32.475Z

No matter what I try I cant replicate what happened before in i3
but it did disappear!

I dont want to use the WYSIWYG editor - I dont want to accidently go into it - hence removing the button
I may have wanted the WYWIWYG editor in the past tho - cant remember what I had for breakfast even )

Daeraxa · 2022-07-08T16:40:42.383Z

The first CSS (div.editor-toolbar div button) selector I think only works within the markdown editor, the one I just posted works in the richtext editor as it has a different toolbar. The pic you posted before has a joplin-tinymce div which must mean you had the richtext editor on.

It also explains why clicking it when you saw it made it vanish, it doesn't exist on the editor you swapped to - the CSS was removing it.

Leigh · 2022-07-08T16:48:12.793Z

Yup, I must have clicked on it when trying t sort things out - bloddy button

This is with Markdown editor

image1920×1097 231 KB

I changed the flex to none manually in the dev tools and it got rid of the button

Daeraxa · 2022-07-08T16:55:58.526Z

I honestly don't see why

div.editor-toolbar div button {
	 display: none !important;
}

Wouldn't target that button in markdown mode, you can see in the html that button is a child of a div which is a child of div.editor-toolbar.

Leigh · 2022-07-08T16:59:42.688Z

oh well
Thanks for your help, much appreciated
I will just have to live with it then cause if you cant see why its not working, there is little hope I will be able too

Daeraxa · 2022-07-08T17:08:07.262Z

Honestly baffled, this is what I expect to see:

image829×537 73.4 KB

If you want to try one final thing you can check if it works in the dev env.

Go Help > Copy dev mode command to clipboard then paste that in either a terminal or whatever thing openbox might have like dmenu. It will open a new Joplin instance unrelated to your main one with its own profile in .config/joplindev-deskop which will have no notes, no plugins, no nothing.

If it doesn't work there then I think your Joplin install is haunted.

Leigh · 2022-07-08T19:01:22.973Z

image1920×1848 328 KB

Leigh · 2022-07-08T19:08:37.012Z

If I want to clean install which folders do I also have to delete (tried uninstalling and reinstalling but all my configs were the same (dark, sync etc)

Is it just the Joplin, Joplin-desktop, and now joplindev-desktop folders in ~/.config?

Daeraxa · 2022-07-08T19:36:02.887Z

You have got me invested enough that I'm putting openbox onto that AL vm...

Basically yes, Joplin is the cache but holds no config data, joplin-desktop and joplindev-desktop are your config folders, removing those should "reset" everything fully.

Leigh · 2022-07-08T20:59:10.302Z

Success!

I uninstalled, deleted my configs, and reinstalled and the first thing I did was to cut and paste from your post above into my new userchrome.css

I was very careful as my system currently opens the css file from the Joplin menu in LibreOffice Writer
Although I always save as text, I just shut LO straight after it was opened by the Joplin menu - thus generating the css file, and then edified the css in xed

ArchLabs_2022-07-08-17_1920x18481920×1848 444 KB

Now to get back to where I was with sync and dark and a keybind I changed (indent)

Leigh · 2022-07-08T21:16:43.019Z

All appearance, pluggins (just 'Menu items, Shortcuts Toolbar icons' and 'Simple Backup'), markup, keyboard shortcuts and webclipper done and still no button

ArchLabs_2022-07-08-38_1920x18481920×1848 450 KB